Simple Things to Check for Garage Door Repair Project

Simple garage door repair work is often handled by the homeowners themselves. There are a few simple things that need to be checked before consulting a professional garage door technician. Some garage door repair works are extremely simple and easy to accomplish.

For example, a squeaky, stiff, or nosier garage door will just need a good cleaning and lubrication using any high-quality silicone spray. Other major garage door repairs such as replacing the torsion springs or malfunctioning opener are extremely dangerous that need the help of professionals like, Tyron, GA garage door repair to handle.

Before proceeding to further garage door repair, don’t forget to unplug the garage door opener from the electric supply, so that you do not get an electric shock while fixing the malfunctioning garage door. Chances are there, you may stand on a ladder which is a really bad place to get an electric shock because you may fall off the ladder and get hurt. Don’t forget to wear safety glasses and gloves while working with the power tools. Here is a list of points to check before calling a professional garage door repair company in this regard.

  • Check the metal tracks to find out the damages:

It is an easy garage door repair work that often solves the malfunctioning of garage doors very fast.  The tracks often may have bumps, dents, or damages. If you find such faulty areas, pound the damaged area of the tracks using a plastic hammer and wood clock to straighten the metal tracks.

  • Check the alignment of metal tracks: 

In case, the metal tracks are not aligned properly, then your garage door will not open or close correctly. It is not always required to unscrew the tracks completely. You just need to loosen the screws and bolts and then gently tap the tracks to their original position. You should check the alignment of tracks with the help of a level. Alignment of tracks will allow you to fix the faulty garage door in no time.

  • Cleanliness of the tracks:

Even though it may sound obvious, the old lubricant and hardened dirt or grease may cause the stuck operations of a garage door. If your garage door just needs merely cleaning of tracks, you can do it in just a few minutes. You can use any mild household cleaner to wash the tracks and then dry them. 

  • Lubricate the rollers and tracks:

Just lubricating the rollers and tracks can fix the issues of the garage door in no time. To lubricate the tracks, you may use any high-quality silicone spray or lubricant oil. It is strongly suggested that lubricate the rollers and tracks properly after cleaning them thoroughly. Basically, any moving hardware will get benefits from lubrication.

  • Tightened the loose screws, blots, and nuts:

The moving components of the garage door including screws and blots tend to become loose with the passage of time. Inspect all the screws and bolts used in the operating mechanism of the garage door. Sometimes, just tightening the hardware may solve the problem. If you are not able to tighten the screws due to the bigger holes then you can use a piece of wood as a filler to cover the holes.

What not to handle?

If you have applied every one of the above-mentioned solutions but none of them have resolved the problems, then you need to check the torsion springs. Well, it is strongly suggested not to perform garage door spring repair work on your own especially if it is a torsion spring. Unfortunately, there are several cases, where people have gotten seriously injured or killed by broken springs. If you have doubts about your skills, don’t try to attempt it on your own. Professional garage door technicians will save you from injuries.